700S
700S – BEST IN CLASS IN TERMS OF ENERGY CONSUMPTION AND NOISE EMISSIONS
The 700S, with its innovative technological solutions, is characterized by reduced noise emissions. This was achieved primarily by optimizing the air flow through the fan channel and implementing new nucleation nozzles. Their unique design allowed to reduce the amount of air required to produce the nucleation mixture and lower the pressure of the compressed air.
The above features, combined with reliability and performance, make the 700S the best choice for those who appreciate quality products created with the environment in mind.
Ceramic nozzles TwinC® SUPERSNOW
The abrasion-resistant, ceramic TwinC® SUPERSNOW nozzles significantly increase the snow gun’s performance. This is possible thanks to the innovative ceramic insert, which is characterized by high resistance to abrasion caused by the flow of water contaminated with sand particles and other precipitates that the filter will not collect. The ceramic insert allows the proper flow of water, which guarantees the maintenance of the correct angle of its atomization and ensures optimal droplet size for years. The incredible ease of nozzle installation and removal means that maintenance requires minimal work.
A new dimension of work – the slotted filtery
The 700S is equipped with a slotted filter characterized by greater durability compared to conventional mesh filters. The filter cartridge is cleaned by rinsing it under running water. In addition, the special design and easy access make it impossible to damage the filter during cleaning.
Nucleation system
The basic components of the nucleation system are dual-media nucleation nozzles equipped with an individual water filtration system. The new design of the nucleation nozzle made it possible to significantly reduce the volume of air required for atomization of water in the nucleation system.
An additional benefit is that the air pressure in the nucleation system can be lowered by about 2 bars, which has a positive effect on the temperature of the compressed air and lower noise emissions from the nucleation nozzles.
The new design of the nucleation nozzle allowed the use of a much smaller air compressor, which has a much lower noise level and significantly lower electricity consumption.
Hybrid water unit
The general idea in designing this valve block was to take advantage of the heat and pressure of the water that is supplied to the snow gun.
Advantages of the design:
- reducing energy consumption,
- using thermal energy from water,
- using the energy (pressure) of water to control valves.
Ventilated weather station
Improved meteo station with an air-insulating layer and a system that forces increased air flow through the humidity and temperature sensor measurement system.
Innovative aluminum axial fan with spherical tube
The fan channel geometry, refined to the smallest detail, optimizes the performance of the propeller, minimizing resistance to airflow through the snow gun tube.
The spherical shape of the hub, together with the unique geometry of the blades are responsible for noise reduction and improved fan performance. In addition, the optimization of the shape of the air intake has reduced the air resistance, making its inflow smoother and during operating does not generate excessive noise.
Axial speed reduction inverter
The special design of the inverter allows it to function at temperatures as low as -40°C, and the IP66 rating confirms its high resistance to water and contamination. All of this qualifies this device to work in the most demanding conditions.
Benefits of the inverter in the 700S:
- stable rotor speed in accordance with the setting regardless of the load,
- increasing the life of the electric motor by eliminating dynamic changes in the current supplying the electric motor,
- optimization of electricity consumption,
- full diagnostics of the electric motor power system.
- Number of water sections 5
- Number of nucleation rings 1
- Number of water jets 96
- Number of nucleators 6
- Working pressure of water 8-40 bar
- Maximum water intake 510 l/min
- Maximum snow production 88 m³/h
- Snow gun without chassis 610 kg
- Snow gun on a technological base 630 kg
- Leg chassis complete (single handle) 160 kg
- Wheel chassis (single handle) 270 kg
| transport | with leg chassis | with wheels | |
| Width | 1270 mm | 2139 mm | 2139 mm |
| Height | 2395 mm | 2330 mm | 2449 mm |
| Length | 1530 mm | 2289 mm | 3016 mm |
- Fan speed in silent mode 1150 rpm
- Fan speed 1450 rpm
- Range of density of snow produced 330-870 g/l
- Number of degrees of snow quality 7
- Adjustment range of tube angle 0°-45°
- Range of rotation 360°
- Ejection range 70 m
- Nominal power consumption in silent mode 10,5 kW
- Nominal power consumption 14,3 kW
- Water ring heating on average 1,8 kW
- Oil-free compressor 1,5 kW
- Fan motor 11 kW
- Rubber water hose (1.9 m)
- Hydrant drive cable (22 m)
- Operator panel cable (1.8 m)
- 5×6 mm2 power cable (22 m)
- Oil-free compressor 1.5 kW
- LED lamp
- Warning light
- Operator panel integrated into the snow gun
- Leg chassis
- Weather station
- Snow groomer single handle
- Angled swivel connector with horizontal inlet with Camlock 2″ female
- Hydrant adapter
- Rubber water hose
- RV100 Hydrant
- Wheels for the leg chassis
- ETH/LTE/other communications
- DV7 hydrant drive charger (8 outlets)
- Mobile snow gun cover mattress
- DV7 hydrant drive
- Snow gun cover
- Extender for mounting the operator panel on the jib
- Communication cable extender (20 m)
- DV7 drive cable extender (20 m)
- Extension power cord (20 m)
- Smartphone control via mobile app
- DV7 drive mount for hydrant
- Snow groomer double handle
- SNOWFLEX hose with Camlock 2″ ends (20 m)
- H800, ST170, T400, T600 jibs
- Spare water filter cartridge
